Audio settings

From the system welcome screen (see تشغيل النظام), click onto open "Settings".

ستُطلب منك عندها كلمة المرور:

  • للولوج إلى مفاتيح الضبط التي تستخدم في أغلب الأحيان، اكتب "admin"
  • للولوج إلى كافة مفاتيح الضبط الممكن استخدامها، اكتب "superadmin"

Types of audio sources

There are 4 types of audio sources available:

  • Analog inputs: 2 Mics (Mono) and 1 line (Stereo)
  • AES
  • SDI embedded
  • AOIP

To embed an analog or AES input to PGM, one of the video inputs should be connected to the SDI IN 1 (DeckLink Studio 4K)

Analog, AES, SDI embedded audio configuration

To enable Analog, AES or SDI embedded audio input, click on inside Input 1 (DeckLink Studio 4K) row.

Click on the left to open INPUT CONFIGURATION

Using the Select input type drop-down menu, choose required type of the input.

Audio delay can also be adjusted here if needed.

Only embedded audio available for other SDI video inputs, all NDI and IP sources.

Audio external devices configuration

Audio external devices can be used to integrate multiCAM to an AOIP environment or for multiCAM IP BOX audio configuration.

Types of audio external devices

External audio devices that can be used:

  • USB sound card
  • AOIP driver
  • Audio inputs on the motheboard
  • Other audio devices,which could be detected by Windows

Add an external audio

The audio external devices area is located on the top-right part of the interface.

To add a new audio input, click on and choose required input

Audio playback configuration

Types of audio playback devices

"Types of playback devices that can be used:

  • USB sound card
  • AOIP driver
  • Audio inputs on the motheboard
  • Other audio devices, which can be detected by Windows

Add a playback audio

The audio playback area is located on the middle-right part of the interface.

To add a new audio output, click on and choose required output

Audio outputs mapping

Audio outputs mapping allows you to configure the inputs/outputs audio matrix inside the system. It could be useful if it is necessary to send some specific audio input to specific audio output.

To configure mappings, click on and manage inputs and outputs inside the interface.